RADEMACHER RolloTron DECT - Deleting All Settings

To Next Page

To Previous Page

DECT

Simultaneously press and hold all three buttons for 4 seconds

and the red LED ﬂashes. Then the red LED lights up for

5 seconds.

The following settings are erased after you release the

buttons:

● End points

● Favourite position

● DECT base station (FRITZ!Box)

Then the RolloTron DECT is reset to the default

factory settings.

9.7 Deleting all settings - loading factory settings

4 seconds

Remove the cover plate from

the setting buttons.

RADEMACHER RolloTron DECT - Deleting All Settings - Loading Factory Settings