72
6. Open the reel compartment cover and check the position
of the fastening hook.
7. If necessary, move the fastening hook into an easily accessi-
ble position.
CAUTION!
There is a risk of injury.
● Never reach into the reel compartment when the motor is
running.
● Always remove the mains plug before touching the reel
compartment.
10. Removing the RolloTron DECT
8. Remove the mains plug again from the socket.
9. Release the belt from the fastening hook and completely
remove from the front of the RolloTron DECT.
To Next Page
Loading...
