diono.com
25
FIRST SETUP
UNFOLDING AND FOLDING
1. Place car seat on its back on a at surface and unfasten
red carry strap from the bottom. Be sure the harness
adjuster moves freely and is not locked within the
bottom of the seat.
2. Rotate bottom until your hear it “click”, this conrms the
car seat is locked for use.
3. Pull harness adjusting strap until harness begins to
tighten. If it does not tighten freely, check the belt path
on the back of the seat bottom is clear from obstruction.
4. Tuck the red strap through the harness slot and store
behind the cover.
To fold, push lever shown and secure
with red strap.
To Next Page
Loading...
