Radian 3RX - Lap Belt Installation

Radian® 3RX
40
REAR–FACING
INSTALL USING 5-POINT HARNESS WITH
LAP BELT:
1. Place car seat rear-facing in
back seat of the vehicle with
detachable rear-facing base
installed (page 32). The entire
seat bottom should sit at on the
vehicle seat.
2. Slide the vehicle seat belt
through the rear-facing belt
path and out the other side.
Buckle it. The vehicle seat belt
should lie at and not be twisted.
5–50 lb (2.3–22.7 kg)
2
1