diono.com
39
REAR–FACING
3. IMPORTANT! Lock your
retractor. Slowly pull the
shoulder belt all the way out
of the retractor. You will hear
a clicking sound as the belt
retracts. This is how you know
the retrator is locked. For more
information on locking your
retractor, please review your
vehicle owner's manual.
Press down rmly in the center
of the car seat. To tighten, pull
from the lap/shoulder belt on
the side nearest to the buckle
while feeding the slack back into
the retractor.
4. Test for tightness. Grab the seat
at the rear-facing belt path. Try
to move the car seat side-to-side
and front-to-back with the force
of a rm handshake. If the seat
moves less than 1 in (2.5 cm), it
is tight enough. DO NOT test by
grasping the top or back of the
car seat.
3
4
To Next Page
Loading...
