Radian 3RX - Page 38

Radian® 3RX
38
REAR–FACING
INSTALL USING LAP/SHOULDER BELT WITH
5-POINT HARNESS:
1. Place car seat rear-facing in
back seat of the vehicle with
detachable rear-facing base
installed (page 32). The entire
seat bottom should sit at on the
vehicle seat.
2. Slide the vehicle seat belt
through the rear-facing belt
path and out the other side.
Buckle it. The seat belt should lie
at and not be twisted.
5–50 lb (2.3–22.7 kg)
2
1