diono.com
47
FORWARD–FACING
3. Unhook and remove top
tether strap from storage
location 2 on back of seat.
4. Feed LATCH/UAS connectors
into forward-facing belt path.
The LATCH/UAS connectors
are easier to feed through by
routing behind cover.
5. Place car seat forward-
facing in back seat of the
vehicle. Center the car seat
between the vehicle LATCH/
UAS anchors. The entire seat
bottom should sit at on the
vehicle seat.
6. Loosely attach tether strap.
Do not tighten. Consult
vehicle’s owner manual for
specic location.
2
Continued on the next page
3
4
5
6
To Next Page
Loading...
