Radio Shack 15-303 - Locking Functions

10
Operation
3. To check the second digit, press and hold SET, and then press 2. The device key
will flash repeatedly to indicate the second digit.
4. To check the third digit, press and hold SET, and then press 3. The device key will
flash repeatedly to indicate the third digit.
Lock Device
Lock the device code in your remote so it doesn’t get changed or deleted
unintentionally.
To lock in the code for your current device:
1. Press the device key that you want to lock on your universal remote.
2. Hold down SET, and then press 7. The device key blinks twice. The code for the
current device is now locked and cannot be overwritten.
3. To unlock the current device key, press and hold SET, and then press 8. The device
key blinks twice.
n Note:
• Thelockeddevicescannotbechangeduntilyouunlockthecurrentdevicekeyorreset
yourremote.
• Tounlockacodeotherthanthecurrentone,pressthatdevicekeybeforefollowingstep3.