Radio Shack 15-303 - Operation; Check Current Brand Code

9
Operation
nNotes:
• Duringasearch,youcanpressSETtochangesearchdirectionfromforwardto
backwardorviceversa.
• Ifnokeysarepressedin10seconds,searchstops.
Operation
Check Current Brand Code
For future reference and to save time if you ever need to set up your remote again,
retrieve and write down your device codes for each device key on your universal
remote.
Complete the following steps to check the code number for a specific device. The
device key on your remote will flash to indicate the codes.
1. Press the device key on your universal remote.
2. To check the first digit, press and hold SET, and then press 1. The device key will
ashrepeatedlytoindicatetherstdigit.(Oncefor1,twicefor2,etc.Ifthedevice
key does not flash, this indicates that the first digit is “0.”)