7
Preparation
Note:
If you entered the code incorrectly, the red
light blink once.
5. Point the remote control at your TV (or cable con-
verter) and press
POWER
. The device should turn
off.
If the remote does not operate your device, try the
other codes listed in “Manufacturers’ Codes” on
Page 12 for your brand of TV or cable converter.
You can also search to find a working code (see
“Manual Code Search” on Page 10).
6. Repeat Steps 2–5 to program the other device
(cable converter or TV).
To Next Page
Loading...
