Radio Shack 20-164 - Appendix E: Talk Group ID Formats

58
59
PubSafety Band
Freq. (MHz) Step
(kHz)
Freq. (MHz) Step
(kHz)
Group 0 Group 2
33.420-33.980 10 453.0375-453.9625 6.25
37.020-37.420 10 458.0375-458.9625 6.25
39.020-39.980 10 460.0125-460.6375 6.25
42.020-42.940 10 462.5500-462.7250 6.25
44.620-45.860 10 465.0125-465.6375 6.25
45.880 467.5625-467.7125 6.25
45.900 Group 3
45.940-46.060 10 764.003125-766.996875 3.125
46.080-46.500 10 773.003125-775.996875 3.125
Group 1 794.003125-796.996875 3.125
151.820-151.940 7.5 803.003125-805.996875 3.125
153.770-154.130 7.5 Group 4
154.145-154.445 7.5 851.0125-852.0125 12.5
154.570 852.0375-853.0375 12.5
154.600 853.0625-854.0625 12.5
154.650-154.770 7.5 854.0875-855.0875 12.5
154.785-154.950 7.5 855.1125-856.1125 12.5
155.010-155.370 7.5 856.1375-857.1375 12.5
155.415-155.700 7.5 857.1625-858.1625 12.5
155.730-156.210 7.5 858.1875-859.1875 12.5
158.730-159.210 7.5 859.2125-860.2125 12.5
166.250 860.2375-860.9875 12.5
170.150 866.0125-868.9875 12.5
Appendix E: Talk Group Format
Motorola
For Motorola Type I, enter the block number,
eet number and subeet number.
Fleet No. Subeet No.
XXX XX
Example: XXX-XX
Motorola Type II talk group IDs are 4- or 5-digit
numbers, divisible by 16.
EDACS
Enter either a four-digit decimal number from
0001 to 2047.
Agency Fleet Subeet (AFS) numbers range
from 00-001 to 15-157. The default EDACS
setting is decimal.
To use AFS format:
1. Press FUNC then 2. “AFS Format” appears
briey.
2. Enter the AFS number:
Agency No. Fleet No. Subeet No.
XX XXXX XXXX
Example: XXXXXX-XXXX
LTR
Enter the area code, home repeater and user ID.
Area Code Home Repeater User ID
0-1 01-20 000-254
Example: 010123