26
USING TIME SEARCH
Your Model 28 lets you quickly move forward or
backward through recorded material on a tape.
For example, if you recorded three half-hour
programs on a tape and you want to see the
third program, you can set the Model 28 to
quickly move the tape past the first hour of re-
corded material.
Notes:
• You can move through up to 9 hours and 59
minutes of recorded material.
• You cannot view the tape or hear the tape’s
sound while you search it.
1. Press
MENU
. The main menu appears on
the TV screen.
2. Press
6
on the remote control to select
TIME SEARCH.
The TV screen shows
TIME SEARCH
, and the hour digit flashes.
3. Use the number keys on the remote control
to enter the desired amount of time you
want to search as h mm. For example, to
search 2 hours and 30 minutes of recorded
material, press
2
,
3
, and
0
.
Notes:
• If you are entering an hour number, do
not precede the number with a 0. If you
are entering a single-digit minute num-
ber, precede it with a 0 — for example,
01
,
02
, etc.
• If you enter an incorrect hour, press
ADD/
DELETE
to move back to the incorrect
hour, then enter the correct hour. If you
enter an incorrect minute, use the num-
ber buttons to re-enter the minutes.
4. To select the search direction, press
F.FWD
or
REWIND
. The Model 28 searches the
tape in the direction you specified and
stops when it reaches the time you speci-
fied in Step 3.
The search time, displayed under
TIME
SEARCH
on the TV screen, counts up or
down as the Model 28 continues to search.
When the counter reaches
0:00
, the
Model 28 stops searching and playback
continues.
5. To cancel a time search, press
STOP
.
USING AUTOMATIC REPEAT
PLAYBACK
Your Model 28 lets you automatically repeat
playback from the beginning to the end of a
tape, or from the beginning to a
blank
(unrecord-
ed) portion of a tape.
Note:
If the counter memory is activated (see
“Using Counter Return” on Page 25), the tape
automatically stops when the counter returns to
0:00:00
, and automatic repeat does not work.
1. During playback, press
MENU
. The main
menu appears on the TV screen.
2. Press
7
on the remote control to select
USER’S SET UP
. The set up menu
appears on the TV screen.
3. Repeatedly press
3
until
ALL
appears next
to
REPEAT PLAY
(to repeat playback
from the beginning to the end of the tape)
or until
BLANK
appears (to repeat playback
from the beginning to a blank portion — of
at least 10 seconds in length — on the
tape).
Note:
If you previously set
RENTAL PLAY
to
ON
(see “Improving Playback of Older
(Worn)/Damaged Tapes” on Page 27), the
Model 28 might not display
REPEAT
PLAY
,
ALL
, or
BLANK
.
To cancel automatic repeat playback,
repeatedly press
3
until
OFF
appears next
to
REPEAT PLAY
.
TIME SEARCH
- : - -
16-420.fm Page 26 Tuesday, July 20, 1999 11:32 AM
To Next Page
Loading...
