Radio Shack 5-In-One Learning Light-Up Remote User Manual

9
Preparation
When batteries become low, the remote control stops
operating to protect stored settings. Replacing the bat-
teries with new ones restores full functionality and does
not require you to reprogram your remote control.
Warning:
Dispose of old batteries promptly and proper-
ly. Do not burn or bury them.
Caution:
If you do not plan to use the remote for a
month or longer, remove the batteries. Batteries can
leak chemicals that can destroy electronic parts.
DEVICE TYPES
You can use the remote control’s device keys to control
the following types of devices:
TV
— TV
VCR
— VCR or PVR (Personal Video Recorder)
CBL/SAT
— Cable converter or SAT/DSS receiver
DVD
— DVD or LD Player
AUX
— Amplifier, tuner or other audio device
SETTING UP YOUR REMOTE
To control devices other than the default brands (for ex-
ample, an RCA TV, VCR, and DIRECTV receiver, a Pio-
neer DVD player and auxiliary device), perform the
following steps. If you use the default brand devices,
skip this section.
1. Refer to “Manufacturers’ Codes” on Page 23 and
write down the code(s) for the brand of each device
you want to program on the supplied label.
Note:
Some manufacturers may have several
codes listed. Try each until you find the right one. If
you cannot find the correct code, see “Using Manual
Code Search” on Page 20.
2. Turn on all your home entertainment devices.

Radio Shack 5-In-One Learning Light-Up Remote Specifications

General

Brand	Radio Shack
Model	5-In-One Learning Light-Up Remote
Category	Universal Remote
Language	English