Radio Shack 5-In-One Learning Light-Up Remote User Manual

5
A Quick Look at the Keys
ˆ A Quick Look at the
Keys
Your Radio Shack 5-In-One Learning Light-Up Remote
controls the most-used functions on your TV, VCR, ca-
ble/SAT/DSS converter, DVD player, and an auxiliary
device.
After you set up the remote control, its command keys
will work like the keys on your original remote controls.
For example, depending on the device you select (TV,
VCR, CBL/SAT, DVD, or AUX)
POWER
will operate just
like the POWER ON/OFF key on the remote control for
your original TV, VCR, cable/SAT/DSS, DVD player, or
auxiliary device.
The following table lists all keys and how they function.
Key Function
P
Use to program the remote con-
trol. The
P
key is slightly
recessed to avoid accidental pro-
gramming changes. You might
need to use a pointed device,
such as a ballpoint pen, to apply
sufficient pressure.
Light Key Use to turn the backlight on or
off. When on, any key press acti-
vates the backlight. It stays on
for up to 5 seconds after the last
key press.
TV
,
VCR
,
CBL/SAT
, and
DVD
Use to set up the remote control
to replace the devices’ original
remote controls. In normal oper-
ation, use to remotely select a
desired device to control.
POWER
,
VOL +
,
VOL –
,
CH +
,
CH–
,
LAST
,
MUTE
,
ENTER
,
Digit Keys, Transport
Keys,
+100
, and
TV/VCR
(
A/B
)
Use the same as the corre-
sponding keys on the original
remote controls.
POWER
can
also be programmed for ALL
POWER on/off of selected
devices (see “Programming the
Power Key” on Page 13).

Radio Shack 5-In-One Learning Light-Up Remote Specifications

General

Brand	Radio Shack
Model	5-In-One Learning Light-Up Remote
Category	Universal Remote
Language	English