Radio Shack CCR-81 Operation Guide

NETWORK 3 UTILITY SOFTWARE
Using MENU with the Network 3
MENU is a BASIC program (included on the Network 3 software diskette) which
you can use to allow students to choose which programs they want to run from a
selection of
BASIC programs. MENU sets up an option list (or "menu") which
makes it easy for the student to select the desired program. __ _
Follow
the steps below to create your own option list program:
1. Set up the Net work 3 Controller, Host system, and Student Stations. Run
the HOST program and load in the Student Station System Software
program by following Steps 1 through 15 beginning on page 3.
2. At a Student Station, when the screen shows Network 3 type
[[) [[) [ru [ID rn ~ and press I ENTER I; then type
[BJ [[) [[) ~ [MJ [g] [NJ [[) ~ ·1 ENTER I .
3. You will need to assign a filename to the new option list program you are
c reating . This filename can contain up to eight letters and numbers, and it
must begin with a letter. In this example, we will use "CHOICES" as the
filename of the new option list program being created. When the line:
What is the filename for the new menu?
appears on the screen, type ~ [HJ [Q] [I]~ [g] [ID (or whatever filename you
choose) and press l ENTER I .
4. Next you will type in 1) a descriptive name for each program that you want
to be available on the student 's option list, and 2) the corresponding filename
of
each program.
11

Radio Shack CCR-81 Specifications

General

Brand	Radio Shack
Model	CCR-81
Category	Desktop
Language	English