Radio Shack CCR-81 Operation Guide

b. USING PROGRAMS FROM A DISKETTE WITH
A DIFFERENT VERSION OF THE OPERATING SYSTEM
(One-Drive Host Systems Only)
If the program(s) you want to run with the Network 3 are on a diskette with a
version of
the operating system other than TRSDOS 1.3 July 1, 1981, you must
first transfer the program(s) to cassette tape, and then transfer the programs from
the
tape to the Net work 3 software diskette. Follow these steps:
1. Connect a cassette recorder to the Host computer. Be sure the recorder is
plugged in. Set the volume of the recorder at 6.
2. Insert a cassette tape in the cassette recorder.
3. Press PLAY or FAST FORWARD on the recorder to advance the tape past
the leader and any programs already on the cassette tape.
4. Reset the tape counter on the cassette recorder to zero by pressing the
button next to the tape counter.
5. Press the PLAY and RECORD buttons on the recorder simultaneously . (If
the recorder is connected properly, it should not come on at this point.)
At the Host Computer:
6. Turn on the computer.
7. Place the diskette containing the program(s) you want to run with the
Net work 3 in the disk drive with the label facing up and the square notch
to the left. Close the disk drive door.
8. Press the orange Reset button.
9. When the screen reads:
TRSDOS Ready
(or other operating
system Ready prompt)
How Many Files?
(TRSDOS only)
Memory Size?
(TRSDOS only)
You type:
rnJ 00 00 [I] ~ I ENTER I
!ENTER!
!ENTER!
23

Radio Shack CCR-81 Specifications

General

Brand	Radio Shack
Model	CCR-81
Category	Desktop
Language	English