Radio Shack CTR-122 - Erasing; Erasing a Recording; Preventing Accidental Erasure

14
Erasing
Erasing a Recording
To record over a cassette tape, you can either:
• Record as usual. The cassette deck records over the previous recording.
• Quickly erase both sides of a cassette tape using a bulk tape eraser, available at
your local RadioShack store.
Preventing Accidental Erasure
To prevent accidental erasure of a tape recording, use a screwdriver to remove one
or both of the cassette tape’s erase-protection tabs. This prevents RECORD from
being pressed.
If you later decide to record on a tape side after you have removed its erase-
protection tab, place a piece of strong plastic tape over the erase-protection hole.
Be sure you cover only the hole originally covered by the erase-protection tab.
YWCaution: Removing the erase-protection tabs does not prevent a bulk tape
eraser from erasing a cassette tape.