20
Troubleshooting
Poor sound quality/recorder does not work properly
• Incompatible metal type tape used. Use only normal type tapes.
• Tape speed setting on
SLOW/FAST. Adjust to NORMAL.
• Check sound settings. Adjust
VOLUME/VOX SENS and VOX/TONE.
• Recorder set on pause mode. Slide
PAUSE to OFF to resume playing.
• Battery power low. Replace with fresh batteries.
• Tape head and parts maybe dirty. See “
Cleaning the Tape-Handling Parts“ on page
17-18 to clean.
• Car adapter plug dirty. Unplug to clean the ignition socket and adapter plug.
Recording keeps stopping/does not work
• Check
VOX/TONE setting. Adjust to OFF for a normal recording as it happens.
• Recorder set on pause mode. Slide
PAUSE to OFF to resume recording.
• Check the erase protection recording tabs on your tape. If broken, use scotch
tape to cover over the tabs.
To Next Page
Loading...
Need help?
General
