16
11. The recorder automatically stops at the end of the tape during playback or
recording. Or, press Q to stop the tape instantly.
ZWNote: The TAPE SPEED setting also affects the fast forward/ rewind speed,
but will not affect recording.
Using the Counter
You can use the tape counter to indicate the tape’s position. Before playing a tape,
press the tape counter reset button to set the counter to 000.
When the recorder plays, the numbers advance to show the amount of tape that
has moved past the tape heads since the tape began moving. When the tape
rewinds, the numbers decrease.
Care and Maintenance
Modifying or tampering with the recorder’s internal components can cause a
malfunction and invalidate its warranty. If your recorder is not performing as it
should, take it to your local RadioShack store for assistance.
• Keep the recorder dry. If it gets wet, wipe it dry immediately.
• Use and store the recorder only in normal temperature environments.
• Handle the recorder gently and carefully. Don’t drop it.
• Keep the recorder away from dust and dirt. Wipe the recorder with a damp
cloth occasionally to keep it looking new.
To Next Page
Loading...
Need help?
General
