38
Recording
keyboard has 19 chord conversion tables to
make the chord sound more natural. Select
the table using the number keys (
0
–
18
). See
“Chord Conversion Table” on Page 53.
Note:
This setting does not work for rhythm
parts.
-- --
appears when you select this
menu item while you are on Channel 10, and
you cannot enter any setting.
Break Point:
specifies the break point. Once
set, any chord above the break point is
played in the next lower octave when you
use CONCERT CHORD, FINGERED, or
FULL RANGE.
Note
: This setting does not work for rhythm
parts.
-- --
appears when you select this
menu item while you are on Channel 10, and
you cannot enter setting.
Quantize:
determines the quantize value af-
ter recording. The timing of notes previously
recorded can be matched with the note tim-
ing of this setting.
Select any one of the following:
Note:
The length of the last note in the pat-
tern might be changed by this setting.
Quantize Execute:
executes the quantize
setting.
Qtz Exe?
appears. Press
YES
.
Complete
appears. Otherwise, press
NO
.
Saving the Settings
After you have finished creating a pattern,
follow these steps to save the pattern.
1. If you were in pattern edit mode, select
Escape
, then press
ENTER
to go back
to pattern create mode.
2. Press
PATTERN
twice.
Save?
appears.
3. Press
YES
to save the pattern.
Or, to exit the pattern sequencer mode
without storing the pattern, press
NO
.
Delete?
appears. Press
YES
to exit
without saving the work area contents,
or press
NO
to cancel the saving opera-
tion and return to the pattern sequencer
mode.
4. Use the number buttons (or
+
/
–)
to spec-
ify the rhythm number location (between
120 and 129), then press
ENTER
.
5. Press
6
or
7
to move the cursor to the
rhythm name input area.
6. Press
+
or
–
to select the characters and
6
or
7
to move the cursor to the next
space, then press
ENTER
.
If the rhythm pattern exists in the specified
location,
Replace?
appears. Press
YES
to
replace the pattern or
NO
to return to Step 6
and enter a different location number.
After you replace the rhythm pattern,
Com-
plete
appears briefly, then the keyboard
exits the pattern sequencer mode.
Channel Quantize Setting
4 Quarter notes
88
th
notes
8T Triplet 8th notes
16 16
th
notes
16T Triplet 16th notes
32 32
nd
notes
32T Triplet 32nd notes
64 64
th
notes
To Next Page
Loading...