Radio Shack PC-2 TRS-80 - Page 12

DEL
@G]
Recall Key. Pressing this key one will display the function key menu for the current reserve mode
(l/II/III). Pressing this key again will recall the contents of the original display.
Spacerbar Key. Pressing this key will advance the Cursor, leaving a blank space. Press (SHIFT)
before pressing this key and the Exponential symbol will be produced and allow you to raise a
numeric expression to a power.
When you press this key, whatever you previously typed will "enter" the Computer's memory.
This key is similar to the Carriage Return key on a typewriter. You must press (ENTER) before the
PC-2 will accept alphanumeric input from the keyboard.
Backspace Key. This key allows you to move the Cursor to the left without erasing previously
typed characters. Pressing (SHIFT) before pressing this key will DELete whatever character the
Cursor is "on top of."
INS
@CB
Forward Key. Pressing this key allows you to move the Cursor to the right without erasing pre-
viously
typed characters. Pressing (SHIFT) before pressing this key will allow I NSertion of characters
directly before the character the Cursor is "on top of."
@ Printer/Cassette Interface Connector Cover. Remove the Cover to attach the PC-2 to the Printer/Cassette
Interface. See Printer/Cassette Interface owner's manual for details. (And attach the Cover to the
bottom of the I nterface so you won't lose it!)
8