50
Beyond the Basics
4. Press e or d to select the scan list location.
5. Enter the talk group IDs for each trunk system.
Motorola talk groups
To enter a Type 2 Talk Group ID:
1. Enter the ID you want to store by using the keypad.
2. Press E.
To enter a Type 1 ID:
For a Type I ID, enter the block number, fl eet number and
subfl eet number to form the talk group ID number. For more
information, see “User Defi ned Fleet Maps”.
1. Enter the ID you want to store by using the keypad (ID
= Block number + Fleet number + ./CLR + Subfl eet
number).
2. Press E.
EDACS talk groups
To enter a Full EDACS ID:
1. Enter the Agency number.
2. Press ./CLR to enter the “dash”.
3. Enter the fl eet number and subfl eet number.
4. Press E.
To enter a Partial EDACS ID:
1. Enter the agency number you want to store. Press ./CLR
to enter the “dash”.
2. Press E.
To Next Page
Loading...
