Care and
Maintenance
The Quick
Printer
II requires very little maintenance. Simply treat it
with the same care you'd give any electro-mechanical device
-
avoid
physical shocks: keep it dry, etc.
The printer mechanism requires no lubrication.
If the print-quality
deteriorates,
you probably need to clean the
prinl
head.
Remove
(he paper cutter (slide it to the left and lift it off).
With
small, fine
brush,
remove
any
debris liom
the print head.
Replace
the
paper cutter.
SNAP IN NIBS
PAPER
CUTTER
PAPER
RELEASE
LEVER
PRINT HEAD-TILT BACK
AND
BRUSH TO CLEAN
Figure
6.
Removing the paper cutter
20
To Next Page
Loading...
