Radio Shack XL-200 - Connecting Speakers (Unbridged;Bridged)

12
Connecting Inputs
Connecting Two Speakers (Unbridged Connection)
This connection produces 100 watts per
channel.
1. Use a screwdriver to connect the left
speaker’s positive (+) wire to the
amplifier’s
SPEAKER L (+)
terminal.
2. Use a screwdriver to connect the left
speaker’s negative (–) wire to the
amplifier’s
SPEAKER L (–)
terminal.
3. Repeat Steps 1–2 to connect the
right speaker’s positive (+) and neg-
ative (–) wires to the amplifier’s
SPEAKER R (+)
and
SPEAKER R (–)
terminals.
Connecting a Subwoofer (Bridged Connection)
1. Use a screwdriver to connect the
subwoofer’s positive (+) wire to the
amplifier’s
SPEAKER L (+)
terminal.
2. Use a screwdriver to connect the
subwoofer’s negative (–) wire to the
amplifier’s
SPEAKER R (+)
terminal.
3. Set
BRG/ST
on the side of the ampli-
fier to
BRG
.
Left Right
Subwoofer
12-2016.fm Page 12 Monday, April 10, 2000 4:33 PM