4
Preparation
ˆ
Preparation
Your amplifier comes with the following items. Be sure you locate everything shown
before you store or dispose of the packing materials.
BEFORE YOU BEGIN THE
INSTALLATION
Before you install your amplifier, you
should be able to answer all of these
questions about your vehicle’s electrical
and auto sound systems.
• Does my vehicle have an auto
sound system, such as a car stereo
or CD player, already installed?
(You must have an existing auto
sound system to use this amplifier.)
• How do I connect a wire to the fuse
box?
• Which of the auto sound system’s
wires is the power wire?
• Which of the auto sound system’s
terminals are low-level outputs and
which are high-level (speaker) out-
puts?
Also, be aware that installation in your
vehicle might require cutting or modify-
ing your vehicle.
Choosing a Mounting Location
A good location for mounting the amplifi-
er is in your vehicle’s trunk. Wherever
you decide to mount it, choose a mount-
ing location that:
• does not interfere with the vehicle’s
operation
• lets you drill mounting holes without
damaging other vehicle components
• allows enough space around the
cooling fins for proper airflow and
cooling
• lets you easily see the amplifier’s
POWER and PROTECTION indica-
tors
FUSE 30A
Red Power Wire (1)
Black Ground Wire (1)
Blue/White Remote Wire (1)
4-Pin Connector with Wire (1)
Sheet Metal Screws (4)
Flat Washers (4)
Lock Washers (4)
Twist-On
Terminal
Connectors (5)
12-2016.fm Page 4 Monday, April 10, 2000 4:33 PM
To Next Page
Loading...
