3. Busy Channel Lockout
You can turn on/off this function via software.
A: If the current channel does not have CTCSS/DC, when there is a signal, TX
prohibited when you press PTT.
B: If the current channel does not have CTCSS/DCS, when there is signal which
does not have CTCSS/DCS, TX prohibited when you press PTT.
C: If the current channels does not have CTCSS/DCS, when there is signal which
have CTCSS/DCS, the radio will transmit when you press PTT.
2. Battery Save Function
This function can be set by the software.
By turning on this function the standby time can be much longer.
Visit Radioddity.com For Downloads And Help
12
Visit Radioddity.com For Downloads And Help
13
To Next Page
Loading...
