4. Wide/Narrow Bandwidth Setting
The default setting is wide band.
5. VOX
Speak to the microphone in normal voice to transmit, no need to press PTT
switch, turn VOX on/off though the software.
A. When VOX is on in your working channel:
Speak to the microphone directly, it will transmit automatically.
The radio stops transmitting when there is no voice, and waits for receiving.
B. When a headset with a microphone is used:
When VOX is on, you should VOX again for the radio to identify voice volume.
If the microphone is sensitive enough, the radio will start transmit.
If the microphone is not sensitive enough, the radio cannot collect your voice. Please
adjust your voice volume to guarantee smooth communications.
Visit Radioddity.com For Downloads And Help
14
Visit Radioddity.com For Downloads And Help
15
To Next Page
Loading...
Need help?
General
