Radioddity GD-55 Plus - Page 30

50
Profiles
1. Press the [ ] key to enter the menu mode.
2. Press [ or ] key to Settings, and then press [ ] key to select.
3. Press [ or ] key to radio setting, and then press the [ ] key to select.
4. Press [ or ] key to Tone, and then press [ ] key.
5. Press [ or ] key to profiles, and then press [ ] key.
6. Press [ or ] key to select General or Silent according to your need.
7. Press [ ] key to save.
49
Power Tone set
1. Press the [ ] key to enter the menu mode.
2. Press [ or ] key to Settings, and then press [ ] key to select.
3. Press [ or ] key to radio setting, and then press the [ ] key to select.
4. Press [ or ] key to Tone, and then press [ ] key.
5. Press [ or ] key to power tone set, and then press [ ] key.
6. Press [ or ] key to select CouloToneon or CouloToneoff according to your need.
7. Press [ ] key to save.
Message Tones
1. Press the [ ] key to enter the menu mode.
2. Press [ or ] key to Settings, and then press [ ] key to select.
3. Press [ or ] key to radio setting, and then press the [ ] key to select.
4. Press [ or ] key to Tone, and then press [ ] key.
1. Press the [ ] key to enter the menu mode.
2. Press [ or ] key to Settings, and then press [ ] key to select.
3. Press [ or ] key to radio setting, and then press the [ ] key to select.
4. Press [ or ] key to Date &Time, and then press [ ] key.
5. Press [ or ] key to date format,and then press [ ] key to display the current time .
6. Press [ or ] key to sel ect the date format you want .
7. Press [ ] key to save, the screen displ ays the time has been saved.
Tone Setting
Tone divided into
Profiles
keypad tone set
power tone set
Msg tones
Keypad tone set
1. Press the [ ] key to enter the menu mode.
2. Press [ or ] key to Settings, and then press [ ] key to select.
3. Press [ or ] key to radio setting, and then press the [ ] key to select.
4. Press [ or ] key to Tone, and then press [ ] key.
5. Press [ or ] key to keypad tone set, and then press [ ] key.
6. Press [ or ] key to select KeyRingon or KeyRingoff according to your need.
7. Press [ ] key to save.