51 52
5. Press [ or ] key to Message Tones selection, and then press [ ] key.
6. Press [ or ] key to select Ring1 to Ring5 according to your need.
7. Press [ ] key to save.
GPS information
GPS function of the machine starts when switch on the GPS ,After Locked by the GPS ,
Latitude and longitude information shows here.
1. Press the [ ] key to enter the menu mode.
2. Press [ or ] key to Settings, and then press [ ] key to select.
3. Press [ or ] key to GPS information, and then press the [ ] key to enter in.
GPS Setting
1. Press the [ ] key to enter the menu mode.
2. Press [ or ] key to Settings, and then press [ ] key to select.
3. Press [ or ] key to radio setting, and then press the [ ] key to select.
4. Press [ or ] key to GPS , and then press [ ] key.
5. Press [ or ] key to select GPS on or off .
6. Press [ ] key to save.
RX GPS information
Here you can see the GPS positioning information send from the other radios .
1. Press the [ ] key to enter the menu mode.
2. Press [ or ] key to Settings, and then press [ ] key to select.
3. Press [ or ] key to Rx GPS information, and then press the [ ] key to enter in.
Specification
Genera
Frequency Range VHF:136-174MHz UHF: 400-470MHz
Channel capacity 1024 Channels
Channel spacing 12.5KHZ
Working voltage 7.8V
Battery type LI-ON
Working temperature -40•+85•
Antenna Impedance 50•
Audio output power •1000Mw@16
Dimension 144*59*40mm
Receive
Analog sensibility 0.35uV/-116dBm(20dB SINAD)
0.22 uV/-120dBm(Type)
Digital sensibility 0.3 uV/-117.4dBm(BER 5%)
0.7 uV/-110dBm(BER 1%)
Common channel Rej ection •-12dB
Adj acent channel selectivity TIA603C: 65dB ETSI: 60dB
Spurious response TIA603C: 75dB ETSI: 70dB
To Next Page
Loading...
