5
Locator features
Keypad.
LCD screen.
Battery compartment
(USB connector inside).
Accessory socket.
Headphone jack.
Locator keypad
Power key: Switches the unit on
and off. Opens the locator menu.
ƒ key: Selects frequency/Closes
submenu.
Up and down arrows: Adjusts the
signal gain/ Scrolls through menu
options.
Antenna key: Toggle between antenna
modes/ Open submenu: Prolonged
key press toggles between depth and
current display on the LCD.
Locator display icons
Bargraph: Indicates strength of locate
signal and peak marker.
Signal strength: Numerical indication
of signal strength and dB reading
when using Fault Find mode.
(Proportional) Left/Right arrows:
Indicates the location of the line
relative to the locator.
Battery icon: Indicates the battery level.
Volume icon: Displays the volume level.
Fault-Find arrows
(PL and TL models only).
Radio Mode: Indicates when
Radio Mode is selected.
Power Mode: Indicates when
Power Mode is selected.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Accessory indicator: Indicates when
an accessory is connected and in use.
A-Frame icon: Indicates when the
A-Frame is connected and in use.
Operating mode indicator.
Compass:
When detecting lines – shows the
direction of the located cable or pipe
relative to the locator.
When detecting sondes – shows the
direction of the longitudinal axis of the
located sonde relative to the locator.
Indicates antenna selection.
Sonde icon: Indicates that the unit is
set to receive signals from sondes*.
Line icon: Indicates that the unit is set
to receive signals from lines*.
Depth or current indicator.
*Take care to set Line/Sonde appropriately,
otherwise the Compass display and depth
display will be incorrect.
18.
19.
20.
21.
22.
23.
24.
25.
To Next Page
Loading...
Need help?
General
