RadioLink R8FG V2.1 - Gyro Sensitivity Adjustment; R8 FG Specifications

RadioLink Electronic Ltd
www.radiolink.com
10
8.4 Gyro Sensitivity Adjustment
Gyro sensitivity is defaulted to adjust by channel eight that default controlled by DL1/PS3 knob switch,
turning the DL1/PS3 knob switch clockwise to increase sensitivity and anti-clockwise to reduce it. When
turning the DL1/PS3 knob switch, a tooltip with yellow background color will pop out at the top of the
screen, and the value of the channel will be changing at the same time, the value is closer to +100, the
higher sensitivity. If the value is 0, it means the gyro function has been turned off.
You can also assign other switches to control the gyro function or adjust the sensitivity on this page.
9. R8FG Specifications
R8FG Receiver
Dimension
L*W*H =35*24*13.5mm (1.38"*0.94"*0.53")
Weight
10.5g (0.37oz)
Channel
8 channels
Antenna Length
205mm (8.07")
Control Distance
Ground 600 meters (1968.5ft) (Maximum range tested in unobstructed areas
free of interference)
Operating Current
35mA (5V)
Operating Voltage
3-12V
Signal Output
SBUS&PWM
Telemetry
Real-time built-in telemetry of model battery voltage, RSSI, and receiver
voltage
Gyro
Receiver with gyro integrated, customizable gyro sensitivity
Water Splash Proof
The waterproof grade is IPX4
Response Latency
3ms, 4ms, 14ms can be selected (If you want to select 3ms or 4ms digital
servo speed, make sure it is R8FG V2.1, or R8FG receiver with a factory
date of 2023/4/26 and later )
Compatible
Transmitter
RC8X/RC6GS V3/RC4GS V3/RC6GS V2/RC4GS V2/RC6GS (3-position
switch version)/RC4GS (version with P.D AFTER 180101)
/T8FB(BT)/T8FB(OTG)/T8S(BT)/T8S(OTG)