RadioLink R6DS User Manual

R6DS
(FHSS and DSSS spread spectrum)
Radiolink R6DS, 2.4G 6 channels receiver, DSSS and FHSS spread spectrum working
synchronously, use for Radiolink transmitters AT9, AT9S and AT10.
SBUS, PPM and PWM signal possible working at the same time.

RadioLink R6DS Specifications

General

Brand	RadioLink
Model	R6DS
Category	Receiver
Language	English

Summary

R6DS Receiver Overview

Radiolink R6DS Receiver Description

2.4G 6-channel receiver with DSSS/FHSS, compatible with AT9/AT9S/AT10 transmitters.

Operating Modes

PWM Signal Output

Red LED indicates PWM signal output, providing 6 channels in total.

SBUS & PPM Signal Output

Blue/purple LED indicates SBUS&PPM, CH1 PPM, CH2 SBUS, CH3 PWM, CH4-CH6 CH8-CH10 PWM.

Signal Mode Switching and Features

Switching Signal Modes

Short press ID SET switch twice within 1 second to toggle between PWM and SBUS&PPM modes.

Key Product Advantages

Highlights anti-interference, high-speed response (3ms), precision (4096), and compact size (3.4g).

Flight Controller Compatibility

Works with DJI NAZA, APM, PIX, NAZE32, CC3D, and other flight controllers.

Technical Specifications and Installation

Channel Configuration

Red LED for PWM mode, Blue LED for SBUS&PPM, extendable to 10 channels.

Power, Range, and Physical Data

Max 6V input, 600m range, 25x15mm size, 3.4g weight, 4096 precision.

Antenna Placement Guidelines

Keep antenna straight, away from metal, motors, ESCs, and noise sources for optimal range.

Binding Procedure

Press and hold the Easy Link (ID SET) switch for one second to bind the receiver.