RadioMaster TX16S

43
Weight: Channel travel amount, the range is -500 / + 500. The default value is 100.
Negative values indicate reverse channel output.
Offset: Midpoint offset, you can add the offset of the input value, positive or
negative. Range is -500 / + 500
Trim: You can choose whether the fine-tuning is effective for this entry, or you can
define a fine-tuning that affects this article separately.
Curve: Curve settings
Diff
Adjust the stroke amount on one side with the midpoint as the boundary
Expo
Expo curve setting. Increasing a positive value will make the gimbal smoother and
smoother when approaching the midpoint, while increasing a negative value will
make the gimbal more acute when approaching the midpoint.
Func
Preset
function
X>0
Positions above 0 (midpoint) follow the gimbal output, operations
below the midpoint are all fixed to the midpoint value of 0
X<0
The opposite of the previous one
|X|
Absolute values, negative values less than the midpoint will always
become positive values, and the actual performance is a V-shaped
curve
f>0
Below the midpoint 0 is fixed at midpoint 0, above the midpoint is fixed
at 100, the actual performance is that the gimbal becomes 0 and 100 to
switch, there is no intermediate process
f<0
The opposite of the previous one
|f|
Above the midpoint is fixed at + 100%, and below the midpoint is fixed
at -100%. The actual performance is that the gimbal becomes -100%
and + 100% to switch. There is no intermediate process.