40
Modes: Select the corresponding flight mode, and the output trimming value that
affects this entry can be set by the flight mode entry
Switch: Select the switch to activate this item (Note: This setting is added to this
item to add multiple lines of different settings to switch, if there is only one line
setting, do not set the activation switch, otherwise the switch will cause this item
to be completely invalid)
Side: Unilateral setting with the midpoint as the boundary. No matter how this
item is set, it will be set to unilateral effect by Side.
All below the midpoint are fixed at 0, and normal output above the midpoint
All above the midpoint is fixed at 0, and normal output below the midpoint
Trim: You can choose whether the fine-tuning is effective for this entry, or you can
define a fine-tuning that affects this article separately.
4.4.4. Mix control (Mixer)
Mixing page for channel settings
The mix control page allows you to combine as many input sources as you want
and map them to any one or more of the 32 output channels. Finally use the next page
(Outputs) to make these purely logical outputs to fit the model device
You have complete flexibility in controlling the mixing from any input to any
output channel.
To Next Page
Loading...
