Model Setup Detailed options：
Model name：Enter your model name here.
Timer1-3：
Up to 3 fully programmable timers that can count up or down.
Timer always on once throttle is not all the way down
Timer on when throttle is not all the way down
Timer speed proportional the throttle
THR 100% Timer 1 second intervals, THR 50% Timer 2
second interval
Setting the timer to a value above 00:00 puts it into count
down mode
Name：Name the timer
Persistent ： Timer retains its value when the Tx is powered of and on or the model is
changed
Minute call：Required SD card with sound pack installed. At each minute the value spoken.
Countdown：-Countdown broadcast, default 10s (10 seconds)
Voice broadcast countdown
E.Limits：Expand the limit. After checking, set the channel rudder limit to ± 125% (default
maximum ± 100%).
E.Trims ： Fine-tuning extension, allowing fine-tuning to cover the entire gimbal range,
instead of ± 25%
Trim Step ： Modify the precision of the fine-tuning step. The accuracy can be modified
according to actual requirements.
To Next Page
Loading...
