3.3.1. Create model and model selection
..............................................................
18
3.4. Model settings (Model Setup)
..............................................................................
19
3.4.1 Model settings(Model setup)
...................................................................
19
3.4.2 Flight Mode(Flight Modes)
.......................................................................
22
3.4.3. Global variables(Global Variables)
..........................................................
22
3.4.4. . Input Source(Inputs)
..............................................................................
24
3.4.5. Mix control (Mixer)
......................................................................................
26
3.4.6. Output(Outputs)
......................................................................................
29
3.4.7. Curves
............................................................................................................
30
3.4.8. Logic switches(Logical Switches)
.............................................................
31
3.4.9. Special Functions
..........................................................................................
34
3.4.10. Digital Transmission and Telemetry
...........................................................
36
3.4.11. Display
.........................................................................................................
38