RADLEY HH0401 - Using the Self-Propelled Function (HH0404 Only)

30
NOTE
 Install the spark plug carefully by hand, to avoid cross-threading.After
the plug is seated tighten 1/8 to 1/4 turn with socket spanner of spark
plug to compress the washer. Release the power lever.
7.2. USING THE SELF-PROPELLED FUNCTION (HH0404 ONLY)
The HH0404 is equipped with self-propelled system. When you engage the self
propelled drive lever while the engine is running, the lawn mower will begin to drive
forwards.
To stop moving the lawn mower, just simply release the self propelled drive lever.
Self Propelled
Drive Lever
Self Propelled
Drive Lever
Self Propelled
Drive Lever
Self Propelled
Drive Lever