RADLEY HH0401 - Emptying the Grass Bag (HH0402, HH0404 Only)

31
HH0401, HH0402, HH0404
7.3 EMPTYING THE GRASS BAG (HH0402, HH0404 ONLY)
WARNING!
Before taking off the grass bag, turn off the engine and wait until
the blade has come to a stop.
If any grass residue is caught in the discharge chute, clean it
using a brush. DO NOT remove grass debris in the mower casing
or on the blade by hand or with your feet. Instead use suitable
tools such as a brush or broom. To ensure that the cut grass can
be collected into grass bag, the discharge opening and inside the
mower casing must be cleared of any blockage.
As soon as grass clippings start to trail the lawn mower, it is time to empty the grass
bag.
1. Use one hand to lift up rear discharge cover and the other to take off the
grass bag. The rear discharge cover automatically falls down after removing
the grass bag and closes the rear chute opening.
2. Empty the grass debris in the grass bag, and reinstall the grass bag.
Grass Bag
Rear Discharge
Cover
Spark Plug
Spark
Plug Cap
Spark Plug Cap