RADLEY HH0401 - Vertical Storage

32
7.4 VERTICAL STORAGE
1. Ensure the power lever is released and the blades have stopped spinning.
2. HH0401, HH0404: set wheel height to the lowest position.
HH0402: Set wheel height to the second lowest position marked "S" on
wheel height bracket.
3. Release handle from upright position, fold down. Lock into vertical storage
position.
Power Lever
Foam Air Filter
Air Filter Cover
Cutting Height
Adjusting Handle
Cutting Height
Adjusting Handle
HH0401 and
HH404
S
HH0402
Lowest
Position