RADWAG PS 6100 R2 User Manual

- 29 -
8.3.1. Inserting Text
List of variables mutual for all working modes, having the same values:
%%
Printout of a “%” character
%V
Current net mass in the current unit
%N
Current net mass in the basic unit
%G
Current gross mass in the basic unit
%T
Current tare mass in the basic unit
%D
Current date
%M
Current time
%I
Balance number
%R
Program number
%P
Project number
%U
User number
%F
Name of a current function – working mode
%C
Date and time of the last adjustment
%K
Type of the last adjustment
%S
Currently weighed product
%Y
Deviation for the last adjustment
%1
Variable 1
%2
Variable 2
Variables depending on the currently used working mode
Variable
Description
Mode for which the variable is active
%W
Standard mass 1 pcs PARTS COUNTING
%H
High threshold
CHECKWEIGHING
%L
Low threshold
%A
Target mass DOSING
%B
Reference mass PERCENT WEIGHING
Non-standard characters used in designing non-standard printouts
\\
a single „\” character
\C
CRLF
\R
CR
\N
LF
\T
Tabulator
\F
Form feed (for PCL printers)
%E
Crop the paper for EPSON printers
Every single printout can contain max 160 characters (letters, numerals, non-standard characters,
spaces). You can apply non-standard characters depending on type of data that is to be printed out.
Example 1:
“RADWAG”
DATE: <current measurement date>
TIME: <current measurement time>
PRODUCT MASS: <current mass indication>
*****SIGNATURE:.........
<current working mode>

RADWAG PS 6100 R2 Specifications

General

Brand	RADWAG
Model	PS 6100 R2
Category	Scales
Language	English