2
WHAT MAKES UP A PROGRAM?
DAY CYCLE: The number of days before the cycle repeats, i.e., 7-day cycle: one week long: 3-day cy-
cle: once every three days.
WATERING DAYS: set weekdays ON or OFF as watering days (7-day cycle). Set "Today's" number
within the cycle (1 through 6-day cycles).
START TIME: The time of day that the program begins. This is the time that the first station in the pro-
gram begins watering. All other stations in the program then follow in sequence, AUTOMATICALLY.
STATION RUNTIME: The number of minutes that each station runs.
I. SET YEAR, DATE AND TIME
1.
Turn the controller knob to DATE/TIME.
2.
The year 1996 will flash in the display. Press
+ or - to set to the current year.
3.
Press ENTERENTER to enter your selection.
4.
The digits for the current month will now
flash (01). Press + or - to set to the current
month.
5.
Press ENTERENTER to enter your selection.
6.
The digits for the current day will now flash
(01). Press + or - to set to the current day.
7.
Press ENTERENTER to enter your selection.
8.
The digits for the current hour will now flash
(00). Press + or - to set to the current hour.
9.
Press ENTER ENTER to enter your selection.
10.
The digits for the current minute will now
flash (00). Press + or - to set to the current
minute.
11.
Press ENTER ENTER to enter your selection.
1
2 4 6 8 10
24:00
3 5 7 9 11
II. SET REPEATING DAY CYCLE
1.
Set dial to day cycle.
2.
Select the program.
3.
Select the day cycle and follow
the applicable instructions.
To Next Page
Loading...
Need help?
General
