6
VII. TO MANUALLY OPERATE STATION(S)
1.
1 = STATION 1
2.
3.
=
5.
3 SECONDS
6.
TO STOP MANUALLY STARTED STA-
TION(S)
1 minute to 240 minutes
Use ENTER ENTER to start the first station in your
Manual run and to move upward through the
stations.
MANUAL STATION(S) allows you to manually run any station or stations you want for the number of
minutes you want. Normal station running times in the Automatic Programs are not affected.
2 = STATION 2
4.
STOP AT ANY STATION YOU WANT, use + or
- to set a running time for it. Use ENTER ENTER to
put the station in line with the others and to
move upward again. Make sure to press EN-EN-
TERTER after setting the time on the last station
you have chosen.
Turn the dial back to AUTO. The controller will
run the station(s) you selected, and then return
to automatic mode and wait for the next start
time.
7.
Turn the dial back to AUTO.
To Next Page
Loading...
Need help?
General
