7
4.
VIII. TO MANUALLY OPERATE PROGRAM(S)
1.
MANUAL CYCLE
2.
3.
=
5.
TO STOP MANUALLY STARTED PRO-
GRAMS(S)
3 SECONDS
6.
Dial to Manual Cycle.
Select the Program
Start the Program using the ENTER button.
If you want to “stack” one of the other programs
to run following the first, repeat #2 and #3
above. The letter (A, B, or C) for the first
“stacked” Program will blink.
4.
IX. TO RUN THE TEST PROGRAM
1.
2.
3.
=
You can manually advance through the stations
of any program by setting the dial to AUTO and
repeatedly pressing the ENTER ENTER key.
2 = 2-minute test per station
Set the minutes of running time from 1 - 10
Press “Enter” to start the test cycle
TEST
Turn the dial to AUTO. Each station will run for
the time you set. If a station has no running time
in any of the Automatic Programs, it will not op-
erate during the TEST.
MANUAL ADVANCE
A
A B C
To Next Page
Loading...
Need help?
General
