12
Buttons and indicators (Continued)
EVEN DAY CYCLE
This light is on when the controller’s active program is set to water on even days of the
month.
ODD DAY CYCLE
This light is on when the controller’s active program is set to water on odd days of the
month.
CYCLICAL DAY CYCLE
This light is on when the controller’s active program is set to water in a cycle with a
specified number of days.
CUSTOM DAY CYCLE
This light is on when the controller’s active program is set to water on specific days of
the week.
AUTO
Set the dial here to run the controller automatically on the programs you set.
STATION WATERING TIME
Set the dial here to set the length of an individual station’s watering time.
WATERING START TIME
Set the dial here to set a program’s watering start times. Eight start times are available
for each program.
MV PUMP START
Set the dial here to enable or disable Master Valve 1 (MV1) for a particular station.
PROGRAM OVERLAP
Set the dial here to set programs to either stack or overlap. The default for all pro-
grams is stack.
TIME/CALENDAR
Set the dial here to set the time and calendar.
EVENT DAY OFF
Set the dial here to set optional day(s) off within the month.
RAIN DELAY
Set the dial here to delay watering for a specified number of days.
MON — SUN
Set the dial to the day of the week to turn that day off or on when setting a custom pro-
gram cycle.
CUSTOM
Set the dial here to set a program cycle to water on specific days of the week.
CYCLICAL
Set the dial here to set a program cycle to water at specific intervals such as every
day, every second day, every third day, etc.
ODD DAYS
To Next Page
Loading...
Need help?
General
