Flow control stem is turned all the way down.
Adjust the flow control stem by turning it counter-clockwise until
water flows through the valve, but do not leave the stem in a full
up position. While water is flowing through the valve, turn the
flow control stem (from the full up position) clockwise until resis-
tance is felt on the flow control stem handle. Then turn the flow
control stem handle counter-clockwise one turn, as the valve
will operate more effectively with the flow control stem handle in
this position.
5. Valve with PRS-B Pressure Regulating Module.
Consult the PRS-B instruction manual for additional trou-
bleshooting information.
For further assistance, please call the Rain Bird Spec Hotline at
1-800-458-3005.
6
To Next Page
Loading...
