Need help?Do you have a question about the Rain Bird ST8-WiFi and is the answer not in the manual?
Details the components included with the outdoor version of the ST8-WiFi Timer.
Details the components included with the indoor version of the ST8-WiFi Timer.
Explains the manual interface controls and status indicators on the timer unit.
Describes the primary functions of the timer's buttons and modes.
Highlights the advanced water management features of the ST8-WiFi Timer.
Lists the necessary tools and materials for installing the timer.
Provides instructions on how and where to mount the ST8-WiFi Timer unit.
Details how to connect valve wires from the timer to the zone valves.
Explains how to connect the timer's power and common wires to the terminal block.
Instructions for connecting an optional master valve to the timer.
Guidance on installing and connecting a pump start relay for water sources like wells.
Instructions for connecting an optional rain sensor to the timer.
Covers installing batteries and connecting the timer to a power source.
Details the power wiring requirements for the outdoor timer unit.
Steps to activate the timer's Wi-Fi hotspot for initial setup.
Instructions for downloading and launching the Rain Bird mobile application.
Guide to setting the current date and time on the timer interface.
Procedure to select a specific zone for programming watering schedules.
Instructions for setting the duration of watering for each zone.
Guide to defining the specific times watering will begin for each zone.
Details how to select days or intervals for scheduled watering.
How to schedule watering for specific days of the week.
How to schedule watering for all odd-numbered calendar days.
How to schedule watering for all even-numbered calendar days.
How to schedule watering at specified intervals (e.g., every 2 days).
How to temporarily suspend scheduled watering for a set period.
Method to copy watering schedule settings from one zone to another.
Explains automatic watering based on programmed schedules.
How to cancel all active watering and disable automatic operation.
How to start watering immediately for all or specific zones.
Procedure to initiate immediate watering for all programmed zones.
Procedure to initiate immediate watering for a single selected zone.
How to increase or decrease watering duration for all zones.
Explains error messages related to electrical shorts or overloads.
Addresses problems with mobile device and timer connectivity.
Troubleshooting steps for when programmed watering does not start.
Solutions for display problems and unresponsive programming.
To Next Page
General