Need help?Do you have a question about the Rain s-dial smart and is the answer not in the manual?
General| Brand | Rain |
|---|---|
| Model | s-dial smart |
| Category | Controller |
| Language | English |
Introduces the new TOUCH&DIAL programming system for controller operation.
Facilitates quick installation outdoors.
Optional security feature for the controller.
Details on connecting electric valves to numbered outputs and common terminals.
Instructions for connecting rain sensors and transformer for indoor models.
Guidance on distance, protection, and common wiring for electric valves.
Steps for stripping wires and connecting them to timer terminals.
Instructions to adjust the current hour using plus/minus icons and confirm.
Instructions to adjust the current day using plus/minus icons and confirm.
Choose between TIMER MODE for manual programming or FLIWER MODE for smart control.
Select A, B, C, D to enter the programming page for irrigation setup.
Select the pump/umbrella icon to access the PUMP/SENS configuration page.
Details on activating and setting up to 4 irrigation programs.
Detailed guide on setting up to two start times for irrigation programs.
Configure irrigation duration per valve and watering frequency settings.
Adjust the irrigation duration for each valve using plus/minus controls.
Configure the interval frequency by hour/day or by days of the week.
Message displayed when overlapping programs are detected.
Deactivate/activate pump or sensor outlets for each valve.
Set duration for manual start per valve or a common duration for all.
Controls for pausing, navigating, and stopping manual irrigation.
Display of current irrigation planning details like start times, duration, and frequency.
Options to pause irrigation, shut down, or reset the controller.
To Next Page
