RainPro HDC-4 - Setting the Calendar

12
each time this valve is activated on this
specific program.
4) Press the ? button to go to the next
station.
5) Repeat steps 3 and 4 for each station
that is to be active on each specific
program. For stations/valves/ that are to
be inactive on each specific program, put
“Station Run Time” at “0”.
6) Each individual “Station Run Time” can
range from 1 minute to 6 hours in
duration.
7) Rotate dial to “RUN” to enter this new
data into controller.
SETTING THE CALENDAR
1) Rotate dial to the Calendar/Schedule
position
2) Choose program A, B or C. To change
program from existing program, push the
PRG button.
3) Using the + and – buttons will make a day
either active or inactive. “+” indicates an