active day or non-circled. Press the “-”
button to change to a circled day, which
indicates an inactive day. Press the ?
button to advance to the next day.
4) Repeat step 3 for each day of the week.
The ? button may be used to advance to
a particular day of the week. To operate
“odd” or “even” days of the month,
continue advancing the ? button and
then activate “odd” or “even” as
described in step 3 above.
DIAL POSITIONS AND FUNCTIONS
“RUN”
Rotate the dial to the “RUN” position after
completing any programming to enter this new
data in controller. Leave the dial in the RUN
position to have the controller operate as
programmed automatically.
RAIN/OFF
Rotate the dial to the “RAIN/OFF” position to stop
all output of the controller. All irrigation will stop.
To return to normal operation, rotate dial back to
“RUN”.
To Next Page
Loading...