3) Push the ? button to choose the first
station in the sequence of the manual
program to start.
4) The “run time” for each station will be
displayed as currently programmed. For
this cycle only, you can customize each
station run time without effecting the
individually programmed station run times
within a program.
5) Push the ? button to sequence through
all the stations, using the + or – buttons to
select the desired run times for this cycle
only.
6) Push the ? button until the station
number appears of which you want to
start this custom cycle.
7) Rotate dial to “RUN” to start this custom,
one-time cycle. It will start with station
number displayed in Step 6. Once
completed, controller will revert to
programmed “automatic” operation.
SEASONAL ADJUST
The seasonal adjust feature provides a one step
universal run time adjustment in 10% increments
To Next Page
Loading...